Optimization of temperature and drying time in the process of making paracetamol tablets using PVP K-25 as a Binder

Authors

  • Yanita Yomberlin Sinta Maria Barangan Pharmacist Profession Education, Faculty of Pharmacy, Sanata Dharma University, Yogyakarta 55282, Indonesia Author
  • Agatha Budi Susiana Lestari Department of Pharmaceutical, Faculty of Pharmacy, Sanata Dharma University, Yogyakarta 55282, Indonesia Author

DOI:

https://doi.org/10.24071/jpsc.v23i1.1072

Keywords:

drying time, factorial design, paracetamol tablet, temperature of drying, PVP K-25

Abstract

Wet granulation is a crucial technique in tablet manufacturing as it improves the physical properties of the formulation, such as the flowability and compressibility of paracetamol. One of the critical stages in this process is drying the granules using oven heating. This study aims to optimize the drying temperature and time and evaluate their effects on the physical properties of paracetamol granules and tablets. PVP K-25 was selected as a binder due to its ability to enhance tablet compactness. A full factorial experimental design with two factors and two levels was used, optimizing drying temperature (°C) and drying time (hours) based on the physical properties of granules and tablets. Data were analyzed using ANOVA and Design Expert 13 software to determine the optimal formulation. The results showed that drying temperature, drying time, and their interaction significantly affected the physical characteristics of granules and tablets. The optimal formulation was achieved at 55°C for 4 hours. Formula A (40°C, 6 hours) and Formula B (60°C, 3 hours) demonstrated the best results in producing tablets with desirable physical properties. Thus, optimizing drying temperature and time can enhance the quality of paracetamol granules and tablets. 

References

Ardiansyah., Rahmawati, T.E., Nabila, N.A., Maliza, F.N., Antoni. F., 2022. Optimasi Formula Tablet Parasetamol Dengan Metode Granulasi Basah (Wet Granulation). Jurnal Farmasi, 2 : 29.

Abimanyu, A.R.P., Rahma, A.D., Putri, D.R., Ismayfatin, H., Audia, W.A., Fatmala, W., Khasanah, Y., Yuniarsih, N., 2023. Formulasi Dan Uji Efektifitas Terhadap Tablet Paracetamol Dengan Metode Granulasi Basah Dan Kempa Langsung: Riview Artikel. Innovative: Journal Of Social Science Research Volume, 3: 7476–7492.

Cahyani, A.N., Susanto, A., Dewi, I.R., Nurkhikmah, I., 2023. Formulasi Tablet Parasetamol Dengan Kombinasi PVP Dan Amilum Umbi Porang (Amorphopallus onchopyllus) Sebagai Bahan Pengikat Terhadap Sifat Fisik Tablet. Jurnal Ilmiah Jophus, 4: 6-7. https://doi.org/10.46772/jophus.v4i02.886.

Direktorat Jenderal Kefarmasian dan Alat Kesehatan, 2020. Farmakope Indonesia, jilid VI. Kementerian Kesehatan Republik Indonesia, Jakarta.

Elisabeth, V., YamLean, P.V.Y., Supriati, H.S., 2018. Formulasi Sediaan Granul Dengan Bahan Pengikat Pati Kulit Pisang Goroho (Musa acuminafe L.) dan Pengaruhnya Pada Sifat Fisik Granul. Jurnal Ilmiah Farmasi, 7: 1–11.

Hiremath, P., Nuguru, K., Agrahari, V., 2019. Handbook of Pharmaceutical Wet Granulation. Academic Press, Amerika.

Kurakula, M., Rao, G.S.N.K., 2020. Pharmaceutical Assessment of Polyvinylpyrrolidone (PVP): As Excipient from Conventional to Controlled Delivery System with a Spotlight on COVID-19 Inhibition. Journal of Drug Delivery Science and Technology, 60: 6.

Maskuriah, D.Z., Wicaksono, Y., Isnawati, N., 2021. Pengaruh Suhu Dan Waktu Pengeringan Pada Formulasi Tablet Ekstrak Daun Kelor (Moringa Oleifera) Dengan Metode Granulasi Basah Menggunakan Fluid Bed Dryer. Internasional Journal of Islamic Medicine, 2 : 62.

Noval., Kuncahyo, I., Pratama, A., Nabillah, S., Hatmayana, R., 2021. Formulasi Sediaan Tablet Effervescent dari Ekstrak Etanol Tanaman Bundung (Actionoscirpus grossus) sebagai Antioksidan. Jurnal Surya Medika, 7: 131.

Rori, W. M., Yamlean, P. V., & Sudewi, S. (2016). Formulasi dan Evaluasi Sediaan Tablet Ekstrak Daun Gedi Hijau (Abelmoschus manihot) Dengan Metode Granulasi Basah. Pharmacon, 5(2), 243-250. https://doi.org/10.35799/pha.5.2016.12212.

Sudarsono, A.P.P., Nur, M., dan Febrianto, Y., 2021. Pengaruh Perbedaan Suhu Pengeringan Granul (40°C,50°C,60°C) Terhadap Sifat Fisik Tablet Paracetamol. Jurnal Farmasi & Sains Indonesia, 4: 44–51.

Syukri, Y., 2018. Teknologi Sediaan Obat Dalam Bentuk Solid. Islam Indonesia University Press, Yogyakarta.

Taylor K.M.G., and Aulton, M.E., 2022. Aultons’s Pharmaceutics the Design and Manufacture of Medicines. 6th edition. Elsevier.

United States Pharmacopeia Convention, 2024a. <1174> Powder Flow. United States Pharmacopeia National Formulary 46 NF-41. U.S. Pharmacopeia Convention, Inc., Rockville.

United States Pharmacopeia Convention, 2024b. <1216> Tablet Friability. United States Pharmacopeia National Formulary 46 NF-41. U.S. Pharmacopeia Convention, Inc., Rockville.

Zaman NN and Sopyan I. Metode Pembuatan dan Kerusakan Fisik Sediaan Tablet’, Majalah Farmasetika. 2020; 5 (2): 82-93. DOI: https://doi.org/10.24198/mfarmasetika.v5i2.26260.

Downloads

Published

2026-06-12

Issue

Section

Articles

How to Cite

Optimization of temperature and drying time in the process of making paracetamol tablets using PVP K-25 as a Binder. (2026). Jurnal Farmasi Sains Dan Komunitas (Journal of Pharmaceutical Sciences and Community), 23(1), 133-143. https://doi.org/10.24071/jpsc.v23i1.1072